Products

A two-headed lupine angel, for Genderqueer pride. This sticker is approximately 3 inches (7.6 cm) on the longest side, and printed on matte vinyl.

Cerberus Cherubim loves going on walks and enacting holy vengeance. The pin is 2 inches (6 cm) wide. It has two pinbacks with rubber clutches and h...

A little putto (cherub) for the Year of the Goat. Each pin is about 2 inches (5 cm) on the longest side with hard enamel, black nickel plating, and...

The caged Golden Guard Hunter. The pin is hard enamel, with gold plating, two pin posts, and rubber clutches. It is approximately 2.3 in (6 cm) lon...

Gorgonops Angel is a bit of a grumpy fellow. You would be too if you were extinct! But secretly he's a big softie. The patch is 4.5 inches (11.4 ...

A two-headed angel of extinction. This pin is approximately 2.5 in (6.3 cm) wide. The pin has hard enamel with glitter accents, gold plating, and ...

A funny little owl, inspired by Greek pottery designs. The keychain is 2 inches (5 cm) long, made of PVC rubber. It features a design on one side....

The Ophanim Pin is part of my angel-themed pin series, Angelology. Ophanim are winged wheel angels. Each pin is approximately 1 inch (3 cm) long, ...

The angel Sandalphon, in "biblically accurate" cherub form. This design is inspired by one of my original characters, Sandy. Each pin is approxima...

A dark green memo pad featuring sepia-toned angels. The pad is square, approximately 3 in (7.62 cm) wide. It has about 50 sheets. The top of the ...

Each pin is 2.3 inches (5.8 cm) wide, with screenprint, hard enamel, three pin posts, and rubber backings. It is available in silver plating with b...

A design of Gwen from the Spiderverse films, posed as the Lady of Sorrows. I was inspired by her story in the second film and the many sorrows she ...

A pale medusa head with black snake hair. Though beheaded, she is still quite dangerous. This pin is a little gorey in honor of Halloween. The pi...

These pins are approximately 2 inches long; with two pin posts with rubber clutches, and hard enamel. They are available in black nickel or gold pl...

This sticker is approximately 3 inches (7.6 cm) on the longest side, with a matte finish.

This pin is 2.1 inches (5 cm) wide with black nickel plating, hard enamel, and red glow enamel. It has two pin posts and rubber backings. This list...

This acrylic keychain is 2.5 inches (6.3 cm) long, double-sided with the same print on both sides. The keychain has a rose gold heart clasp.

This sticker is approximately 2.5 inches on the longest side. It has a matte finish.

This pin is part of my angel-themed pin series, Angelology. A colorful guardian angel of love in all its forms, Heart Seraphim features wings folde...

This sticker is approximately 2.5 inches on the longest side. It has a matte finish.

My original character Sam as a divine messenger, here to deliver your mail with minimal scorch or bite marks. Sam is available in glossy holograp...

Helem, an angel of dreams, carrying the sword with which he slays beasts of nightmare. This pin features my design of a character belonging to @wy...

Hobie is 2.3 inches long and has rainbow plating, soft enamel, and epoxy. He has three pin posts with rubber backings. Rainbow plating is different...

This pin is 2.2 inches (5.6 cm) long, with black nickel plating, hard enamel, and orange glitter accents. It has two pin posts and rubber backings.

A holy chicken with an all-seeing eye. This sticker is approximately 3 inches (7 cm) on the longest side. It is printed on glossy vinyl and featur...

A cute and peaceful angelic bovine. This pin is approximately 1.5 in (2.5 cm) wide. The pin has hard enamel and two pin posts with rubber clutches...

These pins are approximately 2.1 inches long; with two pin posts with rubber clutches, and hard enamel. They are available in black nickel; or gold...

A completely normal mackerel! Well, maybe. The keychain is 3 inches (7.6 cm) long, made with holographic acrylic. It has the same print on both si...

This pin was made in collaboration with Jaizure and Pokettoni, as part of the Alumeire Pin Banner Collection. The photo is courtesy of Roxana, @red...

This pin was made in collaboration with Jaizure and Pokettoni, as part of the Alumeire Pin Banner Collection. Each pin is about 1.8 inches (5 cm) o...

These pins are approximately 2 inches wide; with two pin posts with rubber clutches, and hard enamel. They are available in black nickel or gold pl...

A troubling revelation about holy water... The keychain is 2.5 inches (6.3 cm) long, made with holographic heart acrylic. It has a blue bottle of ...

Though they may have horns and a tail, Horned Angel is as much a part of the angelic choir as any other angel. The pin is 1.7 inches (4.5 cm) lon...

Inspired by "The Lament for Icarus" by Herbert James Draper. Each pin is 2.2 inches long, with gold plating, hard enamel, and three pin posts with ...

An angelic serpent, bright with holy fire. This pin is approximately 1.5 in (3.8 cm) wide. The pin has hard enamel with transparent enamel and rec...

An angelic serpent, bright with holy fire. This pin is approximately 1.5 in (3.8 cm) wide. The pin has hard enamel with transparent enamel and rece...

This acrylic keychain is 2.5 inches (6.3 cm) on the longest side, double-sided with the same print on both sides; it has a gold star clasp.

This sticker is 3 inches on the longest side, with a matte finish.

A yellow seraph on purple, for Intersex pride. This acrylic keychain is 2.5 inches (6.3 cm) long, double-sided with the same print on both sides. ...

A yellow seraph on purple, for Intersex pride. This pin is approximately 1.5 in (3.8 cm). The pin has hard enamel, glitter accents, gold plating, ...

A yellow seraph on purple, for Intersex pride. This sticker is approximately 3 inches (7.6 cm) on the longest side, and printed on matte vinyl.

My original character Israfel, inspired by the angel of the same name, in their seraph form. This pin is approximately 1.5 in (3.8 cm) wide. The pi...

This pin is 2.3 inches (7.6 cm) wide, with black nickel plating, hard enamel, recessed metal in the crown, and a dangle charm. It has two pin posts...

This pin is 2.3 inches (7.6 cm) wide, with gold plating, hard enamel, recessed metal in the crown, and a dangle charm. It has two pin posts and rub...

Karlach is 2 inches long with hard enamel, black nickel plating or gold plating with glitter accents. She has two pin posts with rubber backings.

Kelana Mardil and the Brick and Mortar Gang - residents, if not heroes, of the city of Deadwale. This print features artwork of my Dungeons and Dr...

Lae'zel is 3 inches wide, with hard enamel, black nickel plating and three pin posts. This listing is for seconds grade pins.